No products in the cart.
95%
CRL LLPUA72MBL Matte Black 72″ Upwards Locking Ladder Pull
In Stock
In Stock
Description
- Locks Into the Ceiling Only
- A.D.A. Compatible Thumbturn
- Adaptor Kits Available for Use on 1-3/4″ (45 mm) Thick Doors – LLPA134ADT
- Lock Operates at a Comfortable 42″ (1.07 m) Above the Floor
- 1-1/4″ (32 mm) Diameter Alloy Available in 316 Brushed or Polished Stainless Steel Tubing
- Custom Sizes Ship within One to Two Weeks
- A.D.A. Compliant Models Available – Ask for a Quote Here
Length
72″ (1.83 m)
Finish
Matte Black
Glazing Thickness
1/2, 3/4
Finish/Color
Matte Black
Mounting Points
3
Adaptor For 1 3/4 Inch Thick Doors
LLPA134ADT
Diameter
1-1/4″
Overall Length
72
Mounting Type
Back-To-Back
Our CRL LLPUA Series Upward Locking Ladder Pulls have a fully concealed deadbolt locking mechanism that locks into the ceiling, not into the floor. No need to bend or reach to lock or unlock the door, simply turn a key or thumbturn located at a comfortable height above the finished floor. Intended for use with 1/2″ to 3/4″ (12 to 19 mm) thick tempered glass doors, they are available in brushed and polished stainless steel.
This Upward Locking Ladder Pull is supplied with our standard 7-pin Rim Cylinder with Interchangeable Core, that can be used as the final cylinder or as a temporary, and is easily replaced. If staying with the 7-pin format, just remove the core, have it re-keyed, or replace it with a new one. A selection of 7-pin Cores are available. If proprietary 6-pin Cylinders are required, simply remove the entire Rim Cylinder provided and replace with the proper Rim Cylinder of your choice. The Pull will accept most standard manufactured Rim Type Cylinders.
NOTE: Glass fabrication is required. Push/Pull Indicators in complementary finishes and Dustproof Keepers are sold separately.
This Upward Locking Ladder Pull is supplied with our standard 7-pin Rim Cylinder with Interchangeable Core, that can be used as the final cylinder or as a temporary, and is easily replaced. If staying with the 7-pin format, just remove the core, have it re-keyed, or replace it with a new one. A selection of 7-pin Cores are available. If proprietary 6-pin Cylinders are required, simply remove the entire Rim Cylinder provided and replace with the proper Rim Cylinder of your choice. The Pull will accept most standard manufactured Rim Type Cylinders.
NOTE: Glass fabrication is required. Push/Pull Indicators in complementary finishes and Dustproof Keepers are sold separately.
.
Reviews
There are no reviews yet.