No products in the cart.
67%
CRL GR30HM Mill 3″ Diameter 90 Degree Horizontal Corner for 1/2″ or 5/8″ Glass Cap Railing
In Stock
In Stock
Description
- 6063-T6 Mill Aluminum Alloy
- New Oval Corner in Mill Aluminum
- Requires Two Connector Sleeves (Not Included)
- Welded and Ready to Paint
Grade
6063-T6
“C” Dimension
4-1/2 in (114.3 mm)
Rail Diameter
3″
Dimensions
L=6″ (152.4 mm) and C=4-1/2″ (114 mm)
Type
90 Degree Horizontal Corners
“L” Dimension
6 in (152.4 mm)
Finish
Mill
Glass Cap Size
1/2″ or 5/8″
Material
6063-T6 Aluminum
Glazing Thickness
1/2 or 5/8
Finish/Color
Mill
Angle (Degrees)
90
Diameter
3
CRL Interior Slip-Fit Horizontal Corners for 1/2″ (12 mm), 9/16″ (13.52 mm) or 5/8″ (16 mm) thick glass allow for hairline joint assemblies with straight lengths of CRL Cap Rail. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. Two Connector Sleeves are required for use with each corner.
Each Horizontal Corner is fabricated, and individually packed. Our aluminum corners are welded for painted finishes only. The Internal Corner Splices create an architecturally pleasing mitered joint.
Each Horizontal Corner is fabricated, finished, and individually packed. Standard stainless alloy is 304. Stainless alloy 316 is available on special order.
NOTE: Cat. No. GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure 1/2″ (12 mm) glass; Cat. No. LR56PV Cap Rail Rubber Insert and 95CBL should be used to secure 9/16″ (13.52 mm) laminated glass; Cat. No. 95CBL Silicone and shims should be used to secure 5/8″ (16 mm) glass.
Please contact DK Hardware Sales for more information or a quote.
Each Horizontal Corner is fabricated, and individually packed. Our aluminum corners are welded for painted finishes only. The Internal Corner Splices create an architecturally pleasing mitered joint.
Each Horizontal Corner is fabricated, finished, and individually packed. Standard stainless alloy is 304. Stainless alloy 316 is available on special order.
NOTE: Cat. No. GR5PV Cap Rail Vinyl and 95CBL Silicone should be used to secure 1/2″ (12 mm) glass; Cat. No. LR56PV Cap Rail Rubber Insert and 95CBL should be used to secure 9/16″ (13.52 mm) laminated glass; Cat. No. 95CBL Silicone and shims should be used to secure 5/8″ (16 mm) glass.
Please contact DK Hardware Sales for more information or a quote.
.
Reviews
There are no reviews yet.