No products in the cart.
68%
CRL NH2SASL Satin Anodized Wide U-Channel with Top Load Roll-In Glazing Gasket for 3/8″ and 1/2″ Glass – 120″ Length
In Stock
In Stock
Description
- Use Monolithic Tempered Glass
- Accepts Roll-In Glazing Gasket, Top Pivot Block, and Snap-In Filler Strip
- Available in Stock Lengths, Fabricated Headers, or Header with Side Pockets for ‘Lift and Drop’ Panel Installation
- Channels for 3/8″ or 1/2″ (10 or 12 mm) and 5/8″ or 3/4″ (16 and 19 mm) Glass
- Matches the Width of Door and Sidelite Rails
Height
1-5/8
Length
120
Width
1-7/8
Size
1-7/8″ x 1-5/8″ (47 x 41 mm)
Finish
Satin Anodized
Type
Wide
Glazing Thickness
3/8 or 1/2
Finish/Color
Satin Anodized
This Aluminum Extrusion was developed with three uses in mind:
(1) As a U-Channel that would be the same width as our Sidelite Rails and Door Rails;
(2) As a Narrow Header that is the same width as our Sidelite Rails and Door Rails, and will accept a Top Free-Swinging Pivot to secure the top of the doors;
(3) As an Even Sight Line System, accomplished by first securing the fabricated Narrow Header to the top of the opening, then securing the Sidelite Rail to the Narrow Header with the 1/4″ (6 mm) Header Saddle. All drilling, tapping, and fabrication can be done at your request during manufacturing to save time while installing.
Our policy for Quick Pick products is as follows: These products are stocked in our centralized service center, and upon your order will be shipped on our next re-supply truck to your regional CRL service center. Re-supply trucks ship every week, so if your regional service center does not have stock of the product you require, your order can be filled in just a few days.
You can check the stock availability of any CRL product when you click on the box above marked “CHECK STOCK AVAILABILITY”.
(1) As a U-Channel that would be the same width as our Sidelite Rails and Door Rails;
(2) As a Narrow Header that is the same width as our Sidelite Rails and Door Rails, and will accept a Top Free-Swinging Pivot to secure the top of the doors;
(3) As an Even Sight Line System, accomplished by first securing the fabricated Narrow Header to the top of the opening, then securing the Sidelite Rail to the Narrow Header with the 1/4″ (6 mm) Header Saddle. All drilling, tapping, and fabrication can be done at your request during manufacturing to save time while installing.
Our policy for Quick Pick products is as follows: These products are stocked in our centralized service center, and upon your order will be shipped on our next re-supply truck to your regional CRL service center. Re-supply trucks ship every week, so if your regional service center does not have stock of the product you require, your order can be filled in just a few days.
You can check the stock availability of any CRL product when you click on the box above marked “CHECK STOCK AVAILABILITY”.
.
Reviews
There are no reviews yet.