No products in the cart.
57%
CRL PP08TBS Brushed Stainless 12″ Round PP08 Elegant Series Counter/Partition 3-Way Post
In Stock
In Stock
Description
- Use Monolithic Tempered Glass
- 1-1/2″ (38 mm) Round Stainless Steel Posts with Full Length Channels for 1/4″ (6 mm) Glass
- Six Standard Configurations – End, Center, Corner, 3-Way, 4-Way, and 135 Degrees
- Standard Heights of 12″, 18″, and 24″ (305, 457, and 610 mm) with Flat Top Cap and Welded Base Plate
- Stock Model PP08 Posts, RED-E to Ship
Height
12
Finish
Brushed Stainless
Type
3-Way
Configuration
3-Way Post
Glazed
No
Glazing Thickness
1/4
Glazing Attachment Type
U-Channel
Tube Size
1-1/2
Cap Type
Flat
Material
Stainless Steel
Tube Type
Round
Finish/Color
Brushed Stainless Steel
CRL Elegant Series Glass Partition and Divider Posts are constructed with 1-1/2″ (38 mm) Stainless Steel Tubing. 1/4″ (6 mm) glass can be attached to the full length U-Channels with Cat. No. 33SC Clear Silicone, which meets CRL Standards. Model PP08 Posts are available off the shelf in three stock sizes and two finishes. You can install them in wood, marble or vitreous counter tops using the Welded Base Plate and the supplied screws.
Kit Contains:
1 – Post
1 – Welded Base Plate
1 – Top Cap
1 – U-Channel
and Installation Screws.
These Model PP08 Posts are stock sizes and ready-to-ship to you. If you require Custom Posts we can fabricate these to ship from Los Angeles, California within three to five working days. Also, for Do-it-Yourselfers we offer component parts ready-to-ship so you can fabricate complete units in your own shop.
Round posts measure 1-1/2″ (38 mm) in diameter; Welded base plates measure 3″ (76.2 mm) in diameter. 1/4″ (6 mm) glazing channels measure full length, and rise 1/2″ (12.7 mm) from the post surface.
Product Warning:
Elegant Series Posts can also be custom made to your exact requirements. Polished Brass only stocked in 12″ (305 mm) size.
Kit Contains:
1 – Post
1 – Welded Base Plate
1 – Top Cap
1 – U-Channel
and Installation Screws.
These Model PP08 Posts are stock sizes and ready-to-ship to you. If you require Custom Posts we can fabricate these to ship from Los Angeles, California within three to five working days. Also, for Do-it-Yourselfers we offer component parts ready-to-ship so you can fabricate complete units in your own shop.
Round posts measure 1-1/2″ (38 mm) in diameter; Welded base plates measure 3″ (76.2 mm) in diameter. 1/4″ (6 mm) glazing channels measure full length, and rise 1/2″ (12.7 mm) from the post surface.
Product Warning:
Elegant Series Posts can also be custom made to your exact requirements. Polished Brass only stocked in 12″ (305 mm) size.
.
Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Reviews
There are no reviews yet.