No products in the cart.
65%
CRL PP43TBS Brushed Stainless 12″ High 1-1/2″ Square PP43 Plaza Series Counter/Partition 3-Way Post
In Stock
In Stock
Description
- Use Monolithic Tempered Glass
- 1-1/2″ (38 mm) Square Stainless Steel Posts with Full Length Channels for 1/4″ (6 mm) Glass
- Five Standard Configurations – End, Center, Corner, 3-Way, and 4-Way
- Standard Heights of 12″, 18″, and 24″ (305, 457, and 610 mm) with Flat Cap and Welded Base Plate
- Stock Model PP43 Posts
Height
12
Post Height
12″ (305 mm)
Finish
Brushed Stainless
Type
3-Way
Configuration
3-Way Post
Glazed
No
Glazing Thickness
1/4
Glazing Attachment Type
U-Channel
Tube Size
1-1/2
Cap Type
Flat
Material
Stainless Steel
Tube Type
Square
Finish/Color
Brushed Stainless Steel
CRL Plaza Series Glass Partition and Divider Posts are constructed with 1-1/2″ (38 mm) Stainless Steel Square Tubing. 1/4″ (6 mm) glass can be attached to the full length U-Channels with Cat. No. 33SC Clear Silicone, which meets CRL Standards.
Model PP43 Posts are available off the shelf in two stock sizes and two finishes. You can install them in wood, marble or vitreous counter tops using the Welded Flange Base and the supplied screws. Each Kit contains one Post, one Welded Flange Base, one Top Cap, and Installation Screws. (Flat Top Cap Included)
These Posts are stock sizes and are ready-to-ship to you. We can fabricate Custom Posts to ship from Los Angeles, California within three to five working days. Also, for Do-it-Yourselfers we offer stock component parts ready-to-ship so you can fabricate complete units in your own shop.
Posts measure 1-1/2″ (38 mm) square; Welded base plates measure 3″ (76.2 mm) square; 1/4″ (6 mm) glazing channels measure full length, and rise 1/2″ (12.7 mm) from the post surface.
Model PP43 Posts are available off the shelf in two stock sizes and two finishes. You can install them in wood, marble or vitreous counter tops using the Welded Flange Base and the supplied screws. Each Kit contains one Post, one Welded Flange Base, one Top Cap, and Installation Screws. (Flat Top Cap Included)
These Posts are stock sizes and are ready-to-ship to you. We can fabricate Custom Posts to ship from Los Angeles, California within three to five working days. Also, for Do-it-Yourselfers we offer stock component parts ready-to-ship so you can fabricate complete units in your own shop.
Posts measure 1-1/2″ (38 mm) square; Welded base plates measure 3″ (76.2 mm) square; 1/4″ (6 mm) glazing channels measure full length, and rise 1/2″ (12.7 mm) from the post surface.
.
Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.
Reviews
There are no reviews yet.